Page 1 of 1
Chauvet Intimidator Spot 400 IRC
Posted: Wed Jul 16, 2014 4:38 pm
by ryan
if anyone has a def. for this fixture, it would be greatly appreciated. i am knew to dmx lighting and am not sure if i entered the information correctly.
thank you!
Chauvet Intimidator Spot 400 IRC
Posted: Thu Jul 17, 2014 2:21 pm
by Boxy
Please attach the definition file you have created and a .pdf of the manual for the fixture. If you're new, have you tried a simple LED RGB light to just get things working, before hitting it with a 2-mode 14-channel monster?
Seems a bit of pricey kit for a beginner! I'll have it you can't get it working...
Regards
Chauvet Intimidator Spot 400 IRC
Posted: Thu Jul 17, 2014 8:16 pm
by ryan
all my fixtures work with what information i entered in the fixture definition editor. most everything was fairly straight forward. i simply was looking for something to compare with what i have entered, since i am having a few minor issues with the software not working properly. i figured i would also double check the Definitions as well.
Chauvet Intimidator Spot 400 IRC
Posted: Fri Jul 18, 2014 7:53 am
by Boxy
There are some gobo images too. Save the 3 files in Gobos/others. I don't know what the rules are for the images so do as you please.
Chauvet Intimidator Spot 400 IRC
Posted: Fri Jul 18, 2014 1:52 pm
by ryan
TY!
Chauvet Intimidator Spot 400 IRC
Posted: Sun Sep 07, 2014 12:13 pm
by Massimo Callegari
OK, I've added 2 missing gobos and fixed the definition.
@Boxy, how did you end up having this in the XML file ?
Res="Gobos\Gobos\Gobos\Gobos\Gobos\GLP/gobo00006.png"
Which OS do you use to create fixtures ?
Chauvet Intimidator Spot 400 IRC
Posted: Mon Sep 08, 2014 10:01 am
by Boxy
I don't fully understand how the XML references images in QLC+. Until recently I didn't know where images should be saved.
Anyway, the .pngs were created using GIMP (for those interested) on a Windows 7 machine. The definition was created using v4.7.3 at the time.