Venue Scanner 4

[Davey Daytona]

This is an off brand scanner i bought several years ago as package. They work very well but, having only 4 channels (pan, tilt, gobo, and color), are limited in flexibility. Its biggest restriction is the lamp on and shutter are on the GoBo channel 3. This causes a problem in using the channel as a LTP. In order to select a gobo the lamp must be on and being on the same wheel as the shutter the gobo is not able to be focused. I recommend using channel 3 as an intensity channel so you can control the lamp.

[Davey Daytona]

Venue Scanner 4

[Massimo Callegari]

Hi, can you please add colors and gobos (where possible) for the Click&Go functionality ?
Also, I couldn't find the manual for this product. Can you point me to some link or share the PDF here ?
Thanks

[Davey Daytona]

hello Massimo

I bought a pair of these as a package from Musician's Friend. It came with a little 54 channel mixer and a quick setup guide. I have never been able to find a full Manual. I will try to match the gobos and colors with some of the ones in the data base. They are a bit generic but i have been using them for about 7 years. They are reliable.

[Davey Daytona]

Hello again..

I set the gobos the best i could with the data base in QLC. They aren't exact but without the manual its close enough to recognize what your selecting. I want to explain the "Mix Colors". They start as a pure color and as you raise the value they cross fade into the adjacent color. The single colors snap to a solid color within the value range.

Hope this will work for you. Thanks

DaveyD

[Massimo Callegari]

Great, thanks. Added it.