Q Light Controller+

I posted in the help forum, and we worked through some examples, and I think I found issues with how the Virtual Console works.

What I am trying to do is have individual fixture color options, and then an override so I can set all of them the same color (I use collections for this). See attached qxw file for example. There are two methods proposed in the help forum, one by Tavon and one by david.

Here are some specific cases of it not working as I expect:

Case 1
- turn Light 1 on Red
- turn Light 2 on Red
- turn Light 3 on Red
- turn Light 4 on Red
- turn the All Lights to Green
- ERR: only some lights go green(sometimes only Light 1, sometimes Light 1/2, sometimes Light 2/3/4), the rest go off
- toggle the All Lights to Green
- all lights go off (correct)
- turn the All Lights to Green
- all lights go green (what should have happened the first time)

I am running QLC+ 4.8.2 on Windows 7.

The sample qxw file

Here is a short video demonstrating what I'm seeing (you should be able to reproduce this using the DMX monitor with that file)

http://youtu.be/rDw6nFIQeAU

Hi, works for me with QLC+ from GIT on Linux.

Please try this test version: http://www.qlcplus.org/test/QLC+_4.8.3- ... 141204.exe

Hey Massimo,

That new version has it working correctly now. It must have been some bug in the 4.8.2 version. Will be glad to get the working 4.8.3 when it comes out.

Thanks again, great project you have going here, man!