Q Light Controller+

Hi Massimo,

I loaded my project from my MAC to the RPi last night and when it opened on the Rpi it complained that it could not find the Pulse SlimLite 56 fixture. I tried to remap but that look like it took until I saved and reopened and it removed the fixtures from my scenes.

I then saved it to Rpi again, opened the project and replaced each bad fixture with the correct one, saved as a new project and it re-opens correctly.

I checked the project file and the Spelling and everything is correct in both to MAC file and the RPi file before I have to modify it.

Odd problem.

Thanks
Jimmy

Look at /usr/share/qlcplus/fixures. if the fixure dosnt exist in this folder, simply copy the file from your mac (the fixures are contained in the app-bundle)

Christian is right. Check if the file is present. BTW: Do you have same version installed on both machines?

If you add the file, you also have to update FixturesMap.xml file. The format is obvious (or just copy it from your computer).

If you don't know how to get the files from app-bundle, get them from [github](https://github.com/mcallegari/qlcplus/t ... s/fixtures).

Update, in within the last 2 versions this issues was fixed. I also started loading some fixtures via the web interface even though they are included in the image file.

Let close this for now, when I have time I will do a fresh load and re-test it.