QLC Crashing after loading project via web interface

[Jimmy T.]

Hi All.

Had test system working and adding more controls, scenes and all. Now when I load the project it crashes QLC and drops back to the prompt.

HDMI output shows QLC restarting after the project is loaded then it drops out.

Is there a log that I can look at for QLC that will show if there file has an issues or something QLC does not like?

It's hard to see on the video I captured but looks like:

ftdi_sio 1-1.2:1.0; device disconnected

The web interface in non-resonsive, SSH into the Rpi I can get around but if I try to perform RESTART is sits for a moment and comes back to prompt and does not reboot and restart.

Thanks for any help.

[Jimmy T.]

I attached my project file

[Massimo Callegari]

Hello Jimmy, you just spotted a generic crash, not specifically related to the RPi.
I tested your project via web on the desktop version and it crashes as well.
Gonna fix it right away.

Thanks

[Massimo Callegari]

OK, I've fixed it.
It was something related to nested multipage/non-multipage frames.

Will be included in version 4.8.2

[Jimmy T.]

Thanks Massimo,

I also seen if I load the a single page project about 3 or 4 times in the web it will crash it as well. Could that be part of the same issue?

I attached the file I was using.