Controll scenes with slider
-
Melvin
- Posts: 3
- Joined: Wed Oct 23, 2024 5:26 pm
- Real Name: Melvin
Hello, I once saw someone at an event who also uses QLC+ have buttons to activate scenes and then control their intensity with a slider for the different devices. This means that when the slider was down, the scene didn't turn on for the device. I've been trying it the whole time but I can't get it to work. Can someone help me?
-
MichelSliepenbeek
- Posts: 714
- Joined: Wed Feb 08, 2023 10:24 am
- Location: Nederland
- Real Name: Michel Sliepenbeek
You can make use of a Slider in SubMaster Mode.
The essence is to put the submaster in a frame, together with the Functions you want it to work on.
You can read the on line manual: https://docs.qlcplus.org/v4/virtual-console/slider (you will find the Submaster Mode at the bottom).
For an example you can look overhere: https://www.qlcplus.org/forum/viewtopic ... 840#p74840
To help you recognise the Modes: a slider in Submaster Mode has a green strip in the center, a slider in Level Mode has a Blue strip in the center.
The essence is to put the submaster in a frame, together with the Functions you want it to work on.
You can read the on line manual: https://docs.qlcplus.org/v4/virtual-console/slider (you will find the Submaster Mode at the bottom).
For an example you can look overhere: https://www.qlcplus.org/forum/viewtopic ... 840#p74840
To help you recognise the Modes: a slider in Submaster Mode has a green strip in the center, a slider in Level Mode has a Blue strip in the center.
A QLC Workspace is like a Bob Ross painting: "it's your world, you can create whatever you want!"
-
Melvin
- Posts: 3
- Joined: Wed Oct 23, 2024 5:26 pm
- Real Name: Melvin
Thank you. And can I also have a master controller for all devices and then also controllers for subgroups of devices?MichelSliepenbeek wrote: ↑Wed Oct 23, 2024 10:58 pm You can make use of a Slider in SubMaster Mode.
The essence is to put the submaster in a frame, together with the Functions you want it to work on.
You can read the on line manual: https://docs.qlcplus.org/v4/virtual-console/slider (you will find the Submaster Mode at the bottom).
For an example you can look overhere: https://www.qlcplus.org/forum/viewtopic ... 840#p74840
To help you recognise the Modes: a slider in Submaster Mode has a green strip in the center, a slider in Level Mode has a Blue strip in the center.
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Yes, you still have the Grand Master at your disposal. This influences all intensities over all fixtures.
As long as you start functions inside a frame, the submaster will influence the intensities of the fixtures called by the functions inside that frame.
If you have two frames, with two submasters and f.i. a scene called in frame 1, and this fixture is also present in a scene called in frame 2, they will fight, and HTP logic will kick in. <- something to remember.
As long as you start functions inside a frame, the submaster will influence the intensities of the fixtures called by the functions inside that frame.
If you have two frames, with two submasters and f.i. a scene called in frame 1, and this fixture is also present in a scene called in frame 2, they will fight, and HTP logic will kick in. <- something to remember.
All electric machines work on smoke... when the smoke escapes... they don't work anymore