Q Light Controller+

Posted: **Fri Oct 04, 2024 11:53 am**

A long mousebutton press on the "Open file" icon brings up the recent files popup menu, but no matter what I choose there, a dialog saying "File not found" will pop up.

The files do exist, and when opening via short click and file open dialog, they load just fine.

Posted: **Tue Oct 08, 2024 4:24 pm**

I just tested this and it works as expected for me with Qt 6.7.2
Are the paths actually shown in the recent popup OK for you?

Posted: **Tue Oct 08, 2024 5:40 pm**

If I choose the file (or any other from the list, paths are correct) highlighted in the screenshot, I get the dialog above.

if I short-click and choose the same file, it is found... also when doubleclicking the workspace in filemanager or dragging it on qlc taskbar icon.

Qt version 6.7.3, uptodate openSUSE Tumbleweed

Posted: **Wed Oct 09, 2024 8:33 am**

I tested also with Qt 6.8.0 and works as expected too.
Very strange
Is there any debug message that can help?

Posted: **Wed Oct 09, 2024 9:51 am**

For the long click/recent sequence of operations, there's no debug output whatsoever.

For the short click loading I see this (after the initial debug output during launching):

Code: Select all

QObject::connect: No such signal Solid::Backends::Fstab::FstabStorageAccess::repairRequested(QString)
QObject::connect: No such signal Solid::Backends::Fstab::FstabStorageAccess::repairDone(Solid::ErrorType, QVariant, QString)
QObject::connect: No such signal Solid::Backends::Fstab::FstabStorageAccess::repairRequested(QString)
QObject::connect: No such signal Solid::Backends::Fstab::FstabStorageAccess::repairDone(Solid::ErrorType, QVariant, QString)
QObject::connect: No such signal Solid::Backends::Fstab::FstabStorageAccess::repairRequested(QString)
QObject::connect: No such signal Solid::Backends::Fstab::FstabStorageAccess::repairDone(Solid::ErrorType, QVariant, QString)
void SimpleDeskEngine::clearContents()
void CueStack::stop()
CueStack* SimpleDeskEngine::createCueStack()
Universe thread stopped 0
virtual void MidiPlugin::closeInput(quint32, quint32)
virtual void MidiPlugin::closeOutput(quint32, quint32)
virtual void AlsaMidiOutputDevice::close()
Universe thread stopped 1
virtual void MidiPlugin::closeInput(quint32, quint32)
virtual void MidiPlugin::closeOutput(quint32, quint32)
virtual void AlsaMidiOutputDevice::close()
Universe thread stopped 2
virtual void MidiPlugin::closeOutput(quint32, quint32)
virtual void AlsaMidiOutputDevice::close()
Universe thread stopped 3
virtual void MidiPlugin::closeInput(quint32, quint32)
[InputOutputMap] setting beat type: 0
Time is late by 95393248 nanoseconds
virtual void MasterTimerPrivate::run() MasterTimer is running late!
[IOMAP] !!No match found!! for output on universe 0 - 0 "None"
QList()
[Universe] setOutputPatch - ID: 0 , plugin: "DMX USB" , output: 0
[IOMAP] Found match on output by name on universe 0 - 1 vs 2
bool Universe::setFeedbackPatch(QLCIOPlugin*, quint32) plugin: MidiPlugin(0x101a0f00) output: 2
[MIDI] open output:  2
[QLCIOPlugin] setting lines: 0 4294967295 2
virtual bool AlsaMidiOutputDevice::open()
[IOMAP] Found match on output by name on universe 2 - 0 vs 0
[Universe] setOutputPatch - ID: 2 , plugin: "Loopback" , output: 0
[QLCIOPlugin] setting lines: 2 4294967295 0
[IOMAP] Found match on input by name on universe 3 - 0 vs 0
[Universe] setInputPatch - ID: 3 , plugin: "Loopback" , input: 0 , profile: "None"
InputPatch::set - plugin: "Loopback" , line: 0 , profile: "None"
[QLCIOPlugin] setting lines: 3 0 4294967295
void VCCueList::slotFunctionStopped(quint32) Cue stopped
void VCSlider::setupClickAndGoWidget() Level channel:  1 type:  14
void VCCueList::slotFunctionStopped(quint32) Cue stopped
void VCSlider::setupClickAndGoWidget() Level channel:  1 type:  14
void VCCueList::slotFunctionStopped(quint32) Cue stopped
void VCSlider::setupClickAndGoWidget() Level channel:  1 type:  14
void VCCueList::slotFunctionStopped(quint32) Cue stopped
void VCSlider::setupClickAndGoWidget() Level channel:  1 type:  12
void VCCueList::slotFunctionStopped(quint32) Cue stopped
void VCSlider::setupClickAndGoWidget() Level channel:  3 type:  12
void SimpleDeskEngine::clearContents()
void CueStack::stop()
CueStack* SimpleDeskEngine::createCueStack()
Universe thread started 0
Universe thread started 1
Universe thread started 3
Universe thread started 2
void Universe::updateIntensityChannelsRanges() : 2 ranges

Q Light Controller+

Small bug in QLC+4 GIT Qt6 build

Small bug in QLC+4 GIT Qt6 build

Re: Small bug in QLC+4 GIT Qt6 build

Re: Small bug in QLC+4 GIT Qt6 build

Re: Small bug in QLC+4 GIT Qt6 build

Re: Small bug in QLC+4 GIT Qt6 build