Q Light Controller+

Hi. I'm building a Pi based lighting rack and just wanted to see if anyone else has this issue when using the web access feature.

I've setup a solo frame with 12 buttons for 12 different functions, works perfectly unless i try using the GM fader. Touching the GM fader switches off the currently selected solo button, switching my lights off. Ran the same show on my mac to see f it was the same but the GM fader isn't visible when web access is used. Can't seem to find any solution on the forum/google search. Any help would be much appreciated

Thanks

Dave

Pi 4 model b
Qlc version 4.13.1-1

This bug has been confirmed—even in the Windows version. Somehow, choosing "Static & Colour changes" and using the GM in the web interface activated 'Slow 2' at about 94%. If you lower the GM even more, all functions are killed.

Temporarily fix: use a slider in submaster mode inside the solo frame. I tested it, and it works.

That is great, thanks you for taking to time to have a look at this and offering up a solution - works great as you have stated. 90% of the time i will be using a custom midi foot controller just for the function changes but on occasions someone will be using the web interface and I'll be adding some additional features for these occasions.

It is always an excellent reflex to add submasters. It is not because you are prepping during daylight that the lights are too bright at showtime.

Fixed upstream, thanks for reporting