Q Light Controller+

Hi

I have recently been using QLC+ for lights and I am very satisfied with using this software!
Now I would like to use video to have a Video mapping (Projection mapping). With Qlc+ is it possible to have the mapping tools as used in Resolume? or can QLC+ be used simultaneously with Resolume or Madmapper?
I hope this is the right section to ask this question?

Thank you

QLC+ does not do video mapping. Just use specialized software.
To synchronize QLC+ with the other software, you can use artnet, sACN, OSC, MIDI protocols. Look at the other software and find a match.

Jano

Good morning,
I use HEAVYM for video mapping. I control HEAVYM from DMX values ​​sent from QLC+.

thibaultphil wrote: ↑Thu Jun 13, 2024 5:51 am Good morning,
I use HEAVYM for video mapping. I control HEAVYM from DMX values ​​sent from QLC+.

Hi,
that's great news, can you give me some advice on how to do it?
Thank you

If some absolute madlad developer had time they could merge MapMap in. It's a Qt application too.

Another need would be to be able to control a Stepper motor for which I already have the controller but I don't know if Qlc+ can generate a movement signal as it does for a Moving Head.

Mikelo76 wrote: ↑Thu Jun 13, 2024 10:02 am Another need would be to be able to control a Stepper motor for which I already have the controller but I don't know if Qlc+ can generate a movement signal as it does for a Moving Head.

You'll need something to translate DMX into that movement data. There's plenty of options like Arduino libraries.

Yestalgia wrote: ↑Thu Jun 13, 2024 10:22 am

Mikelo76 wrote: ↑Thu Jun 13, 2024 10:02 am Another need would be to be able to control a Stepper motor for which I already have the controller but I don't know if Qlc+ can generate a movement signal as it does for a Moving Head.

You'll need something to translate DMX into that movement data. There's plenty of options like Arduino libraries.

I have already used Arduino in the past to move Stepper motor, it would just be necessary to understand if QLC + can generate a signal that goes to Arduino.

Mikelo76 wrote: ↑Thu Jun 13, 2024 10:44 am

Yestalgia wrote: ↑Thu Jun 13, 2024 10:22 am

Mikelo76 wrote: ↑Thu Jun 13, 2024 10:02 am Another need would be to be able to control a Stepper motor for which I already have the controller but I don't know if Qlc+ can generate a movement signal as it does for a Moving Head.

You'll need something to translate DMX into that movement data. There's plenty of options like Arduino libraries.

I have already used Arduino in the past to move Stepper motor, it would just be necessary to understand if QLC + can generate a signal that goes to Arduino.

I found it
https://www.youtube.com/watch?v=RtvbEccsefk

Mikelo76 wrote: ↑Thu Jun 13, 2024 7:55 am

thibaultphil wrote: ↑Thu Jun 13, 2024 5:51 am Good morning,
I use HEAVYM for video mapping. I control HEAVYM from DMX values ​​sent from QLC+.

Hi,
that's great news, can you give me some advice on how to do it?
Thank you

You define all your mapping sequences in HEAVYM, possibly including synchronization with sound. When your mapping project is finished, you launch QLC+ on the same PC. In your QLC project you create a new universe or you assign a dmx channel per HEAVYM function that you wish to execute (example: play a HEAVYM sequence, fade the video projector, etc.). You integrate your mapping sequence into your chaser, into a show, into a collection... like a classic projector.