Hi,
This is my first experience with moving heads. My Virtual Console contains an XY Pad and a Cue List. The cue list contains scenes with the same fixture connected to the
XY Pad. It seems that when I press the play button, the XY Pad takes precedence, and the head goes to the last position set in the XY Pad. Then, when I start the cue list, the first scene in the cue list that moves the head is ignored. But not the identical scene several cues later. I thought maybe it had something to do with HTP/LTP, but that doesn't explain why the first scene doesn't work, but the subsequent scene does. Any ideas?
It seems like the cue list, and any other widget are mutually exclusive? I tried a slider as well.
Thanks,
Howie
XY Pad question
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Howie, at a first, hunch, you re-apply the same scenes inside your chaser - setting (calling) the same scenes again? This is bad: one will set/reset your chaser...
Send in your project-file and we'll sort it out.
Send in your project-file and we'll sort it out.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
MichelSliepenbeek
- Posts: 718
- Joined: Wed Feb 08, 2023 10:24 am
- Location: Nederland
- Real Name: Michel Sliepenbeek
The cue list contains scenes with the same fixture connected to the XY Pad.
I suggest not to use a Cue List for Moving Head Positions, but use a (second) XY pad instead.
Here you will find an example: viewtopic.php?p=72815#p72815
A QLC Workspace is like a Bob Ross painting: "it's your world, you can create whatever you want!"