fixture monitor 3d view

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
username
Posts: 8
Joined: Fri Mar 01, 2024 10:56 pm
Real Name: Vik-real

Hello People of all kinds,

I am currently preparing for a theatre show where I will use a bunch of Dimmer channels to control LED strips of approx 2m length, with a particular layout. Programming time at the venue will be restricted, so I will have to "blind" program quite some sequences and scenes. for this I wanted to use the 3D view of the Output Monitor. Unfortunately, I noticed that each channel is represented as a circle where a dimmer is a rectangle. so a dimmer with one channel van be represented as a long rectangle with only a smill circle that will light up.
Now my question: is it possible to modify the shape of the circle so that it fills the entire rectangle? any lightbatten or other than round shaped fixture could benefit from this I suppose.

Thanks for any suggestions.
Attachments
this is the plot of a house,<br />LEDstrips should represent walls
this is the plot of a house,
LEDstrips should represent walls
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

How did you setup your fixture? It looks like it is a 1m long batton with only one head - this is the normal way of representing things.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Post Reply

Return to “Generic”