Q Light Controller+

I am in the process of entering the different channels with the editor... but the 64 Chans is giving me problems.
Each channel controls a color... but the colors repeat and cannot be combined in the editor:

ex :
Channel 1 / value 000-255 / Red 0-100%
Channel 2 / value 000-255 / Green 0-100%
Channel 3 / value 000-255 / Blue 0-100%
Channel 4 / value 000-255 / White 0-100%
Channel 5 / value 000-255 / Red 0-100%
Channel 6 / value 000-255 / Green 0-100%
...
Channel 64 / value 000-255 / White 0-100%

In the editor, I can only choose a color once... and yet they appear several times.
How to do ??? create multiple channels for the same color???

THANKS.

EDIT : OK NOW

Have a look at the Fixture definition of the Eurolite Led DMX Pixell Tube 16 RGB or the Showtec LED Light BAr 16.

Just make a copy, rename it and add the White channels.


Or start with a copy of the Showtec Led Pixel Bar 12 RGBW and add 4 more "pixels".

So the solution is 1 color per chan.. Ok

Don't forget to define "the Heads".

Must be ok now ! thx !

Need to Validate by admin

Added, thanks