Page 1 of 1
limit the movement of a moving head qlc+ 4
Posted: Mon Feb 26, 2024 5:36 pm
by drivilo
Good morning
how can we limit the movement of a moving head so that when I put it in sound mode channel 96 in dmx it remains in a defined working field. Let me explain, I don't want her to go back or turn towards me.
THANKS
Re: limit the movement of a moving head qlc+ 4
Posted: Tue Feb 27, 2024 9:49 am
by GGGss
If you use the inbuilt sound mode of your fixture, you won't be able to restrict its movements.
If you are using the audio widget of QLC+, then there is a way to limit pan / tilt movements. But this involves some Loopback Magic... (and faders which are limited and so on...) Quite an advanced feature.
If you want to go that way, be welcome to reach out.
Re: limit the movement of a moving head qlc+ 4
Posted: Sat Mar 02, 2024 7:10 pm
by drivilo
GGGss wrote: ↑Tue Feb 27, 2024 9:49 am
If you use the inbuilt sound mode of your fixture, you won't be able to restrict its movements.
If you are using the audio widget of QLC+, then there is a way to limit pan / tilt movements. But this involves some Loopback Magic... (and faders which are limited and so on...) Quite an advanced feature.
If you want to go that way, be welcome to reach out.
ok thanks for your response.