Page 1 of 1
Re: QLC+ 4.12.7 release
Posted: Wed Jan 10, 2024 6:11 pm
by temfra
With this update (I came from 4.12.6 on Macbook M1, Sonoma Os) I noticed that the blackout function doesn't work anymore on my two lasers:
- Proel PLLAS040
- Img Stage line LSX 300 SRGB
My usb interface is a Eurolite Dmx Pro Mk2.
If I come back to 4.12.6 the blackout function still works.
Do you suggest something to do?
Re: QLC+ 4.12.7 release
Posted: Wed Jan 10, 2024 9:28 pm
by mcallegari
From the changelog
engine: fix blackout to leave LTP channels untouched
Most likely your custom fixtures have LTP channels that shouldn't be LTP
Re: QLC+ 4.12.7 release
Posted: Thu Jan 11, 2024 5:41 am
by temfra
I saw the changelog, but I thought LTP was something about moving head... I don't have so much experience on DMX. How can I verify if one or more channel are LTP on my fixtures? I attach the configurations.
Thanks.
Francesco
mcallegari wrote: ↑Wed Jan 10, 2024 9:28 pm
From the changelog
engine: fix blackout to leave LTP channels untouched
Most likely your custom fixtures have LTP channels that shouldn't be LTP
Re: 4.12.7 blackout behaviour
Posted: Thu Jan 11, 2024 8:31 am
by mcallegari
[moderator] I moved your posts in a more appropriate place
Re: 4.12.7 blackout behaviour
Posted: Thu Jan 11, 2024 9:14 am
by MichelSliepenbeek
1. Go to the Fixtures Tab.
2. Press the Channel Fade Configuration Button.
3. Unfold the Fixture(s) you want to Check/Change.
Re: 4.12.7 blackout behaviour
Posted: Sun Jan 21, 2024 6:32 pm
by temfra
Thank you very much, now it's all ok!