Launchpad MK2 - Flashing Buttons for feedback
Posted: Sat Nov 11, 2023 8:20 am
I always liked the feedback on the AKAI APCs where the active buttons can be set to flash.
For a long time now I've been using my Launchpad MK2 to trigger scenes, but I was never happy with a solid feedback colour.
Now I found a quick fix in the "Programmers Reference Manual": Just set the MIDI output channel of the Launchpad to 2 (in the Inputs/Outputs-Page of QLC+) and your active buttons will start to flash between their static and their feedback colour.
Sorry if this is an obvious solution to everyone else, it just took me ages to figure it out and I thought it might be helpful to someone else.
For a long time now I've been using my Launchpad MK2 to trigger scenes, but I was never happy with a solid feedback colour.
Now I found a quick fix in the "Programmers Reference Manual": Just set the MIDI output channel of the Launchpad to 2 (in the Inputs/Outputs-Page of QLC+) and your active buttons will start to flash between their static and their feedback colour.
Sorry if this is an obvious solution to everyone else, it just took me ages to figure it out and I thought it might be helpful to someone else.