Use Buttons to change the behaviour of a fader
Posted: Fri Aug 11, 2023 1:09 pm
Dear QLC+ Community,
my pre-exposure to this software is quite limited, so I'm very sorry if this is a weirdly phrased question.
What I'd like to do is have a set of intensitiy faders for different colors like a red, green, blue, magenta, cyan, amber etc. fader. The tricky thing is: I'd also like to have a set of buttons for each respective fader that i could press to tell the fader for which fixtures it should apply the color change.
For example I have the fixture group "all PARs" and the fixture group "all washers" and I have the faders red and blue - id like to press the washer button for the red fader and both buttons for the blue fader and that should produce that by moving the red fader upwards only the washers become red and by moving the blue fader all fixtures become blue.
These should work additionally, meaning that in this example with the buttons pressed as described i can mix red and blue for the washers in this example and both faders being at 100 produces blue LEDs and purple washers.
I hope my description is understandable. Thank you in advance for your suggestions!
Best,
eingereicht
my pre-exposure to this software is quite limited, so I'm very sorry if this is a weirdly phrased question.
What I'd like to do is have a set of intensitiy faders for different colors like a red, green, blue, magenta, cyan, amber etc. fader. The tricky thing is: I'd also like to have a set of buttons for each respective fader that i could press to tell the fader for which fixtures it should apply the color change.
For example I have the fixture group "all PARs" and the fixture group "all washers" and I have the faders red and blue - id like to press the washer button for the red fader and both buttons for the blue fader and that should produce that by moving the red fader upwards only the washers become red and by moving the blue fader all fixtures become blue.
These should work additionally, meaning that in this example with the buttons pressed as described i can mix red and blue for the washers in this example and both faders being at 100 produces blue LEDs and purple washers.
I hope my description is understandable. Thank you in advance for your suggestions!
Best,
eingereicht