Hi all,
searched the forum but could not find a related message; sorry if I missed any.
I'm using a Eurolite USB DMX512 Pro MK2 for which Protocol must be forced to "Pro RX/TX". This works on my Linux laptop, but on the RPi (headless) I can not find such a setting in the web interface. Is there any other way to force this ?
I'm using the qlcplus_raspios_bullseye_20220828 image on an RPi 4.
Thx,
Filip.
How to force Protocol to "Pro RX/TX" on RPi ?
- mcallegari
- Posts: 4807
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
It cannot be set via web interface
viewtopic.php?p=68565
viewtopic.php?p=68565
- GGGss
- Posts: 3145
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
If you'd ssh into the raspi and open the project file, there should be a possibility to alter the setting ...
But I don't know the right values to enter there.
So the only solution is to attach a monitor and keyboard to the Raspi and tweak the settings in the GUI.
But I don't know the right values to enter there.
So the only solution is to attach a monitor and keyboard to the Raspi and tweak the settings in the GUI.
All electric machines work on smoke... when the smoke escapes... they don't work anymore