fixture not turning off after chase

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
mikep
Posts: 5
Joined: Tue Mar 20, 2018 9:15 pm
Real Name: Mike Parkins

I have some Chauvet SlimPARs running a simple chase, started with a virtual button. The chase works fine but when I stop it, only one of the lights turns off, the others stay on the last colour they stopped on. I have a button to turn them all off but I would prefer a better solution. Anything I might be doing wrong?
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

HTP or LTP profile?
If the latter, you have to instruct them to go dark.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
mikep
Posts: 5
Joined: Tue Mar 20, 2018 9:15 pm
Real Name: Mike Parkins

I haven't changed anything about the fixtures and I don't know much about LTP/HTP, but I will have a look at that, thanks.
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Send in your project please... I can have a look
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
mikep
Posts: 5
Joined: Tue Mar 20, 2018 9:15 pm
Real Name: Mike Parkins

I think it was a glitch of some sort, since it came good after I saved the project and restarted the program.
First show tonight went well - sorry to have bothered you :-)
Top
Post Reply

Return to “Generic”