Hi everyone
A FRIEND ASKED ME TO CREATE SOME FIXTURES FOR HIM.
THEY WERE CREATED FROM MY COMPUTER, I TAKE THE FILES TO YOUR COMPUTER BUT THEY DID NOT WORK
IT TAKES ME ALL AS A SINGLE CHANNEL DIMMER.
YOU COULD TRY IF IT WORKS???
THE FIXTURES YOU BELIEVE DON'T WORK
-
DJSOPA
- Posts: 1
- Joined: Wed Jul 27, 2022 4:18 pm
- Real Name: diego bustamante
- Attachments
-
LM70-LM70.qxf- (1.15 KiB) Downloaded 25 times
-
- big-dipper-LS10.qxf
- (3.71 KiB) Downloaded 29 times
-
- beam-4-chino.qxf
- (2.72 KiB) Downloaded 26 times
-
edogawa
- Posts: 630
- Joined: Thu May 07, 2015 10:34 am
- Real Name: Edgar Aichinger
These definitions are not complete. You have created channels, but defined no modes for any of these fixtures.
The QLC manual has a section on using the fixture editor and covers the process of creating a fixture definition well enough, IMO.
The front page has a link to the fixture validator where you can upload your definition and see if it's done correctly.
Finally, what advantage does writing in CAPS gain you, may I ask? It looks ugly and is received as aggressive shouting by most people...
The QLC manual has a section on using the fixture editor and covers the process of creating a fixture definition well enough, IMO.
The front page has a link to the fixture validator where you can upload your definition and see if it's done correctly.
Finally, what advantage does writing in CAPS gain you, may I ask? It looks ugly and is received as aggressive shouting by most people...