Q Light Controller+

Hi There
I`m new here and try my first step on DMX
I have an Art Net Controller in my Network (192.168.1.30)
Also i installed at my Laptop the Q Light Controller+ Software (192.168.1.38)
Now i cant get a Connection to the Controller and i really dont know why....
I see at my Node Tree my Art Net Controller and i add two RGB Spot on channel 1-3 in the Universe 1 but it doesnt work.

I have also an Art Net App on my cellphone which is working perfect.
Hope somebody can give me a hint why it doesnt work.
Here some Print screen

Can you share details of your configuration, operating system, QLC+ version, network configuration, Art Net node model and a sample project?
And please post your questions in the correct section of the QLC+ forum. You published your question in the Fixture definitions section.

Hi
So i have a pknight Art-Net2 CR021R (See Picture)
Configuration:
Local IP 192.168.1.30
Subnet 255.255.255.0
Port Universe Out01 :01
Port Subnet (SubNet: 15)
Port Net (Net: 127)

My Laptop
OS: Windows 10
Local IP: 192 .168.1.38
Q Light Controller+ ( Version 4.12.5)

In the Attachment my settings at the QLC+ what i did

How i can move my post to the right section and which one is the right one?
Thanks

I haven't paid attention but someone seems to have moved the post to v4 usage questions/generic.

I don't have much experience with Artnet, but recently set up a small light installation with the Enttec ODE we have in our theater, and got it to work with QLC on a RPi.

I'm at holidays right now, but from what I remember I'm pretty sure the address you ask for in screenshot 1 is 192.168.1.30 in your case (it was the ODE's 192.168.1.50 in mine).

Have you tried to change the ArtNet universe in the ArtNet config from 0 to 1?. Take a look to the ArtNet section in the QLC+ manual.
https://www.qlcplus.org/docs/html_en_EN ... lugin.html

In the following post you can find some recommendations to configure ArtNet on your network, computer and devices. I followed this recommendations on my setup and all is working as expected when I need to use an ArtNet device.
viewtopic.php?p=64335#p64335