Cannot remove some fixtures from a Sequence

The issues found when using the Function Manager panel
Forum rules
Post Reply
User avatar
lorenzoandreani
Posts: 101
Joined: Tue Sep 01, 2015 9:19 am
Location: Marina di Carrara
Real Name: Lorenzo Andreani

This happens:

- Cannot remove some fixtures from a Sequence

- Go to Functions / Sequence / Beam / <SE> Beam DM Left-Right

- Remove the four V700 Spot from the fixture list (using the - button)

- Close and restart QLC + (the fixtures are not present in the sequence)

- Start the "<SE> Beam DM Left-Right" sequence from the virtual console

- Back to functions / sequence / beam / <SE> Beam DM Left-Right:
the four previously deleted fixtures are still present

I attach the show file.

QLC+_4.12.5.179.exe / Windows 10
2022 Show.qxw
(715.82 KiB) Downloaded 416 times
Top
User avatar
sbenejam
Posts: 607
Joined: Sun Apr 12, 2015 6:28 pm
Real Name: Santiago Benejam Torres
Contact:
Contact sbenejam

Can you share your custom fixtures definitions?.
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

lorenzoandreani wrote: ↑Sat May 07, 2022 6:54 pm
- Remove the four V700 Spot from the fixture list (using the - button)

- Close and restart QLC + (the fixtures are not present in the sequence)
And you did save in between?
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
User avatar
lorenzoandreani
Posts: 101
Joined: Tue Sep 01, 2015 9:19 am
Location: Marina di Carrara
Real Name: Lorenzo Andreani

sbenejam wrote: ↑Sun May 08, 2022 7:44 am Can you share your custom fixtures definitions?.
Fixtures.zip
(75.22 KiB) Downloaded 483 times
Top
User avatar
lorenzoandreani
Posts: 101
Joined: Tue Sep 01, 2015 9:19 am
Location: Marina di Carrara
Real Name: Lorenzo Andreani

GGGss wrote: ↑Mon May 09, 2022 8:38 am
lorenzoandreani wrote: ↑Sat May 07, 2022 6:54 pm
- Remove the four V700 Spot from the fixture list (using the - button)

- Close and restart QLC + (the fixtures are not present in the sequence)
And you did save in between?
Yes, sure
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

-edit-
OOPS for now - my fault
Attachments
ScreenHunter_174 May. 11 22.48.png
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

lorenzoandreani wrote: ↑Sat May 07, 2022 6:54 pm This happens:

- Cannot remove some fixtures from a Sequence

- Go to Functions / Sequence / Beam / <SE> Beam DM Left-Right

- Remove the four V700 Spot from the fixture list (using the - button)
... in your provided show file there are no VL700's...

as per:
ScreenHunter_177 May. 11 23.05.png
and -defined okey- #butnotreferenced:
Attachments
ScreenHunter_176 May. 11 23.02.png
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

PPS: Please DO clean UP your files...
With Every Bigger project, I start ALL OVER and have a clean file ... #fromZeroToScratchOn

Your current show file takes me like 11+ seconds, to load your show file on my über-decent laptop...
#itnowstartstostincksomehowe
ScreenHunter_178 May. 11 23.22.png
This won't be my desk #Imsorry
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
User avatar
lorenzoandreani
Posts: 101
Joined: Tue Sep 01, 2015 9:19 am
Location: Marina di Carrara
Real Name: Lorenzo Andreani

GGGss wrote: ↑Wed May 11, 2022 9:04 pm
lorenzoandreani wrote: ↑Sat May 07, 2022 6:54 pm This happens:

- Cannot remove some fixtures from a Sequence

- Go to Functions / Sequence / Beam / <SE> Beam DM Left-Right

- Remove the four V700 Spot from the fixture list (using the - button)
... in your provided show file there are no VL700's...

as per:
ScreenHunter_177 May. 11 23.05.png

and -defined okey- #butnotreferenced:
2022 Show - Copia.qxw
(717.03 KiB) Downloaded 469 times
Sorry,
the V700s reappear only after starting the function from the virtual console:
I enlarged the button to start the function
Top
User avatar
lorenzoandreani
Posts: 101
Joined: Tue Sep 01, 2015 9:19 am
Location: Marina di Carrara
Real Name: Lorenzo Andreani

GGGss wrote: ↑Wed May 11, 2022 9:14 pm PPS: Please DO clean UP your files...
With Every Bigger project, I start ALL OVER and have a clean file ... #fromZeroToScratchOn

Your current show file takes me like 11+ seconds, to load your show file on my über-decent laptop...
#itnowstartstostincksomehowe

ScreenHunter_178 May. 11 23.22.png
This won't be my desk #Imsorry
In my notebook load in about 5 seconds

I use all these functions. Not having the possibility to use the palettes for colors and positions I would not know how to work with fewer functions
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

The show file crashes after 30s of loading... 4.12.5 GIT
It loads with the 4.12.4
and now I do need the custom fixtures to debug even further...
ScreenHunter_35 May. 13 10.53.png
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
User avatar
lorenzoandreani
Posts: 101
Joined: Tue Sep 01, 2015 9:19 am
Location: Marina di Carrara
Real Name: Lorenzo Andreani

GGGss wrote: ↑Fri May 13, 2022 8:54 am The show file crashes after 30s of loading... 4.12.5 GIT
It loads with the 4.12.4
and now I do need the custom fixtures to debug even further...
ScreenHunter_35 May. 13 10.53.png
screen.png
It works for me, I use it to do 4 events a week and it doesn't crash.

Why doesn't it load the custom fixtures?
Did you download them?
lorenzoandreani wrote: ↑Wed May 11, 2022 8:03 pm
sbenejam wrote: ↑Sun May 08, 2022 7:44 am Can you share your custom fixtures definitions?.
Fixtures.zip
Top
User avatar
sbenejam
Posts: 607
Joined: Sun Apr 12, 2015 6:28 pm
Real Name: Santiago Benejam Torres
Contact:
Contact sbenejam

I can confirm that the V700 reappears after run Beam DM Left-Right sequence. It's hard to diagnose why they reappear is a complex project. This fixtures are used in many other parts of the project.
Top
User avatar
lorenzoandreani
Posts: 101
Joined: Tue Sep 01, 2015 9:19 am
Location: Marina di Carrara
Real Name: Lorenzo Andreani

sbenejam wrote: ↑Sat May 14, 2022 6:06 am I can confirm that the V700 reappears after run Beam DM Left-Right sequence. It's hard to diagnose why they reappear is a complex project. This fixtures are used in many other parts of the project.

I simplified the show:
2022 simply.qxw
(62.36 KiB) Downloaded 355 times
Top
User avatar
sbenejam
Posts: 607
Joined: Sun Apr 12, 2015 6:28 pm
Real Name: Santiago Benejam Torres
Contact:
Contact sbenejam

After remove the V700 fixtures save the project and edit it with a text/xml editor.
The lines referencing to the V700 fixtures ID's from the Scene are removed after saving the project:
<FixtureVal ID="36">3,0</FixtureVal>
<FixtureVal ID="37">3,0</FixtureVal>
<FixtureVal ID="38">3,0</FixtureVal>
<FixtureVal ID="39">3,0</FixtureVal>

But the ID's of V700 fixtures are remaining in the step lines of the sequence:
<Step Number="0" FadeIn="0" Hold="0" FadeOut="0" Values="16">9:2,255:36:3,255:37:3,255:38:3,255:39:3,255:48:2,255:49:2,255:72:7,255:73:7,255:81:2,255</Step>
<Step Number="1" FadeIn="0" Hold="0" FadeOut="0" Values="16">12:2,255:36:3,255:37:3,255:38:3,255:39:3,255:50:2,255:51:2,255:74:7,255:75:7,255:82:2,255</Step>


Original File:

Code: Select all

<Function ID="249" Type="Scene" Name="&lt;SE&gt; Beam DM Left-Right" Hidden="True" Path="_Various">
   <Speed FadeIn="0" FadeOut="0" Duration="1712"/>
   <FixtureVal ID="48">2,0</FixtureVal>
   <FixtureVal ID="49">2,0</FixtureVal>
   <FixtureVal ID="50">2,0</FixtureVal>
   <FixtureVal ID="51">2,0</FixtureVal>
   <FixtureVal ID="72">7,0</FixtureVal>
   <FixtureVal ID="75">7,0</FixtureVal>
   <FixtureVal ID="73">7,0</FixtureVal>
   <FixtureVal ID="74">7,0</FixtureVal>
   <FixtureVal ID="81">2,0</FixtureVal>
   <FixtureVal ID="82">2,0</FixtureVal>
   <FixtureVal ID="9">2,0</FixtureVal>
   <FixtureVal ID="12">2,0</FixtureVal>
   <FixtureVal ID="36">3,0</FixtureVal> 
   <FixtureVal ID="37">3,0</FixtureVal> 
   <FixtureVal ID="38">3,0</FixtureVal> 
   <FixtureVal ID="39">3,0</FixtureVal> 
  </Function>
  <Function ID="250" Type="Sequence" Name="&lt;SE&gt; Beam DM Left-Right" Path="Beam" BoundScene="249">
   <Speed FadeIn="262" FadeOut="262" Duration="524"/>
   <Direction>Forward</Direction>
   <RunOrder>Loop</RunOrder>
   <SpeedModes FadeIn="Common" FadeOut="Common" Duration="Common"/>
   <Step Number="0" FadeIn="0" Hold="0" FadeOut="0" Values="16">9:2,255:36:3,255:37:3,255:38:3,255:39:3,255:48:2,255:49:2,255:72:7,255:73:7,255:81:2,255</Step>
   <Step Number="1" FadeIn="0" Hold="0" FadeOut="0" Values="16">12:2,255:36:3,255:37:3,255:38:3,255:39:3,255:50:2,255:51:2,255:74:7,255:75:7,255:82:2,255</Step>
  </Function>
Modified file:

Code: Select all

<Function ID="249" Type="Scene" Name="&lt;SE&gt; Beam DM Left-Right" Hidden="True" Path="_Various">
   <Speed FadeIn="0" FadeOut="0" Duration="1712"/>
   <FixtureVal ID="48">2,0</FixtureVal>
   <FixtureVal ID="49">2,0</FixtureVal>
   <FixtureVal ID="50">2,0</FixtureVal>
   <FixtureVal ID="51">2,0</FixtureVal>
   <FixtureVal ID="72">7,0</FixtureVal>
   <FixtureVal ID="75">7,0</FixtureVal>
   <FixtureVal ID="73">7,0</FixtureVal>
   <FixtureVal ID="74">7,0</FixtureVal>
   <FixtureVal ID="81">2,0</FixtureVal>
   <FixtureVal ID="82">2,0</FixtureVal>
   <FixtureVal ID="9">2,0</FixtureVal>
   <FixtureVal ID="12">2,0</FixtureVal>
  </Function>
  <Function ID="250" Type="Sequence" Name="&lt;SE&gt; Beam DM Left-Right" Path="Beam" BoundScene="249">
   <Speed FadeIn="262" FadeOut="262" Duration="524"/>
   <Direction>Forward</Direction>
   <RunOrder>Loop</RunOrder>
   <SpeedModes FadeIn="Common" FadeOut="Common" Duration="Common"/>
   <Step Number="0" FadeIn="0" Hold="0" FadeOut="0" Values="16">9:2,255:48:2,255:49:2,255:72:7,255:73:7,255:81:2,255</Step>
   <Step Number="1" FadeIn="0" Hold="0" FadeOut="0" Values="16">12:2,255:50:2,255:51:2,255:74:7,255:75:7,255:82:2,255</Step>
  </Function>
Top
Post Reply

Return to “Function Manager”