Q Light Controller+

Dear experts
It's my first post here so sorry if I missed something (I have used search, no results).

I'd like to ask if you could share with me fixtures for these specific light source:
Litepanels Gemmini 2x1 Soft
Litepanels Gemmini 1x1 Soft
Litepanels Sola 6

thank you in advance
best reards from Brussels
Norbert

Please read this first: viewtopic.php?f=6&t=1652

Please provide link to manual that contains DMX chart for the lights. If you want others to spend time solving your problem, give them all you know/they need,
so they don't have to spend their time on things you can do as well.

Thanks!

Jano

janosvitok wrote: ↑Tue May 03, 2022 1:03 pm Please read this first: viewtopic.php?f=6&t=1652
Please provide link to manual that contains DMX chart for the lights. If you want others to spend time solving your problem, give them all you know/they need,
so they don't have to spend their time on things you can do as well.
Thanks!
Jano

Well I have read it and as I said ... I might missed something if so I'm sorry my bad - I'm not familiar with DMX systems
I hope this is what you asking for Sir

https://www.litepanels.com/media/8712/g ... -chart.pdf
or
https://www.litepanels.com/media/12625/ ... rt-v37.pdf

Hello Norbert bonjour,
A very complex fixture if you ask me - DMX-wise.

Since QLC+ has an RGB engine inside, I would limit the fixture profile to the native capabilities of QLC+.

I can produce a limited profile if you tell me in what mode you would like to work with?

Salut
Thanks for answer. Well as I said I'm not very familiar with dmx and pro lightning systems - my manager asked me to take care of it since I'm photographer (because every photographer has to be the light master hahaha) so that's why I'm looking for help here.
But to the point: what I need is working fixture for white light with dimmer - that basically all, we are using it in the small video recording studio.
Of course colors will be more than welcome.
Thanks

Guys,
I have found some fixtures for Lightkey software (for MacOs) - does anybody know if is possible to convert them into QLC+ ones ?
It will probably save the time/ work.
Thanks in advance.
ps. I don't have mac to check :/
https://lightkeyapp.com/en/fixtures