Q Light Controller+

Hello!
Can you please help on creating the fixture for the Vibesta Peragos Tube 120C?
https://www.vibesta.com/peragos-tube

Here is the DMX manual:
https://drive.google.com/file/d/1U536gX ... YKP3a/view

Thank you so much!

I am sorry but this fixture is very very complicated to fit in the fixture definition concept.
There are 2 (and more) levels of dependent channel sets. Mode channel 1 sets/changes the behaviour of underlying channel functions. And even then underlying channels set to a 'mode' does alter other more underlying channel functions.
Does the manufacturer provide a definition for Chamsys or Hog or GrandMa? I don't think so...
If you want to use it as a light batten, I'd choose only one functional mode the named RGBDT. It will closely fit the QLC+ environment. (Except for the tungsten channel: in real life, I guess this is the Amber channel).
Does remind me of the Astera Titan tubes...

Hello!
Thank you very much for your feedback!
No, the manufacturer does not provide a definition for Chamsys or Hog or GrandMa. Communication with them isn't really fluid, I am getting information from the seller where I got them.

I've found in the meanwhile that in QLC+, the mode channel 1 is (automatically and always) assigned to the GM fader and whichever the value is selected, it's always blinking (no stable output) and impossible to get a controllable behaviour.

I will ask about the definition for Chamsys or Hog or GrandMa and if I get some information I'll post it.

Once again thank you!

gabrielgodinho wrote: ↑Mon Feb 14, 2022 10:33 pm I've found in the meanwhile that in QLC+, the mode channel 1 is (automatically and always) assigned to the GM fader and whichever the value is selected, it's always blinking (no stable output) and impossible to get a controllable behaviour.

That is because you set channel 1 as intensity! You should use 'program' or something. Intensity channels are controlled by the GM.