Enttec mk2 LC2412 midi
Posted: Tue Jan 25, 2022 11:52 am
Hello,
I have a problem which is maybe related to this thread
I can't get the LC2412 to work as an input control surface with Enttec Mk2 midi input.
I don't know if the LC2412 isn't sending proper midi or if the Mk2 dont transmit to QLC+.
As stated in the doc, LC2412 is working but thru a BCF midi input. Is anyone already had success with enttec Mk2 midi input ?
Is there any step to enable midi input of the Mk2 under linux and under windows, because both are not working.
Thanks for reading this.
My setup is as follow :
QLC4.12.4
Windows 10 / Ubuntu 20.04
Behringer LC2412 V 01.06.01
Enttec DMX Pro Mk2 FW v4.08
I have a problem which is maybe related to this thread
I can't get the LC2412 to work as an input control surface with Enttec Mk2 midi input.
I don't know if the LC2412 isn't sending proper midi or if the Mk2 dont transmit to QLC+.
As stated in the doc, LC2412 is working but thru a BCF midi input. Is anyone already had success with enttec Mk2 midi input ?
Is there any step to enable midi input of the Mk2 under linux and under windows, because both are not working.
Thanks for reading this.
My setup is as follow :
QLC4.12.4
Windows 10 / Ubuntu 20.04
Behringer LC2412 V 01.06.01
Enttec DMX Pro Mk2 FW v4.08