Hello friends. QLC noobie here. Anyone got any recommendations for physical faders for qlc? I have an Akai APC Mini which I got working, but I would like more physical slider faders.
Thanks
Noah
Midi Faders For Light Control
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Have a look here: https://www.qlcplus.org/features.html under Midi
There are many more solutions, but these ^^ work out of the box.
There are many more solutions, but these ^^ work out of the box.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
edogawa
- Posts: 630
- Joined: Thu May 07, 2015 10:34 am
- Real Name: Edgar Aichinger
I've used different controllers with QLC+:
- up to three Korg nanoKontrol2, which are relatively cheap but not very robust in my experience (faders start to output random values around the bottom position). Also it can be tricky to get them in order because during hot plugging ALSA cannot properly distinguish them, as far as I understood (If using more than a single one I run them through a USB 2.0 hub).
- my M-Audio Axiom 61 (1st generation)
- a Behringer BCF2000
All three are well supported (input profiles exist), though the BCF2k needs a bit time and reading to be configured properly (in my experience at least).
- up to three Korg nanoKontrol2, which are relatively cheap but not very robust in my experience (faders start to output random values around the bottom position). Also it can be tricky to get them in order because during hot plugging ALSA cannot properly distinguish them, as far as I understood (If using more than a single one I run them through a USB 2.0 hub).
- my M-Audio Axiom 61 (1st generation)
- a Behringer BCF2000
All three are well supported (input profiles exist), though the BCF2k needs a bit time and reading to be configured properly (in my experience at least).