Page 1 of 1
eDMX1 PRO, no output
Posted: Fri Dec 24, 2021 11:32 pm
by mmurphy
Haven't used my eDMX1 PRO for quite some time. Pulled it out today to play around with and can't get it to talk to my lights.
I used the config tool, everything appears to be ok.
Looked for it with DMXworkshop, it sees it there too.
Activity on the ethernet indicator but no signal to lights.
Checked cables, checked address on lights.
Nothing!
What did I miss?
Re: eDMX1 PRO, no output
Posted: Sun Dec 26, 2021 8:20 am
by sbenejam
Can you post details of your network devices and computer network config?.
Re: eDMX1 PRO, no output
Posted: Mon Dec 27, 2021 7:37 am
by GGGss
?? One screenshot shows me an eDMX on 192.168.0.111. The other screenshot has a value of 192.168.0.125.
^^ this isn't right and will make you doubt things for sure.
I assume your QLC+ is connected wirelessly on 192.168.0.197. I would start with a wired connection.
A screenshot of the QLC+ input/output tab would be helpful and show us what options you have set for the Artnet Universe you are using.
PS: (Wireless does not like broadcast packets and Artnet does do broadcasts - so you are in trouble again...)
PPS: (disable the RDM option for now ... keep it stupid simple)
Re: eDMX1 PRO, no output
Posted: Mon Dec 27, 2021 5:32 pm
by sbenejam
One more thing, are you connect your computer directly to the eDMX or through a network router?. Can you post your computer IP network configuration?.