Hello QLC+ forum,
Thanks for your welcome.
I'm starting with QLC+ so I can be wrong.
I'm not able to get the the correct fixture representation of my led bars which is 5 col 32 row / 1 univers (5*32=160 pixels)
The ”Fixture” tab build the correct configuration but the ”Functions > Fixture Monitor” draws 5 panels of 3 * 9 + 1 * 5 pixels
image attached.
That's of course not what I'm expecting. Do I miss something ?
Thank you very much for helping me.
RGB panel : errors in Fixture monitor
-
mcallegari
- Posts: 4711
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
that's because you created a RGB panel with 5 rows and 32 columns, not the opposite.
Also, remember to specify the physical dimensions, otherwise the preview will present a wrong layout
Also, remember to specify the physical dimensions, otherwise the preview will present a wrong layout
-
lairom
- Posts: 5
- Joined: Tue Nov 16, 2021 7:54 am
- Real Name:
Is that mean I can't show 5 vertical bars of 32 leds in the fixture monitor ?
because I tried to reverse rows & cols definition and now I get horizontal blocks of 5 pixels.
I know I could turn them by 90° but my leds light up on the wrong axis.
That's why I've started previously by making 5 cols of 32 rows : for me rows are pixels cols are individual bars
Can't QLC+ set this ? Where am I wrong ?
image of my setup attached.
because I tried to reverse rows & cols definition and now I get horizontal blocks of 5 pixels.
I know I could turn them by 90° but my leds light up on the wrong axis.
That's why I've started previously by making 5 cols of 32 rows : for me rows are pixels cols are individual bars
Can't QLC+ set this ? Where am I wrong ?
image of my setup attached.
- Attachments
-
-
lairom
- Posts: 5
- Joined: Tue Nov 16, 2021 7:54 am
- Real Name:
Sorry to insist because the 32 cols by 5 rows fixture definition is good to light up my 5 vertical led bars but the fixture monitor can't show 32 cols of 5 rows. It seems limited to blocks of 9 per 4 px. Please look attached. I don't want to troll more this forum.
Thanks for your replies.
Thanks for your replies.
- Attachments
-
-
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Can you share your fixture definition?
In your case, these are 5x 32 headed fixtures. You will have to create a fixture profile for those...
Have a look at my example here:
The project file and custom fixture are attached.
In your case, these are 5x 32 headed fixtures. You will have to create a fixture profile for those...
Have a look at my example here:
- Attachments
-
Showtec-Led-Light-Bar-16.qxf- (27.19 KiB) Downloaded 48 times
-
- Ledbars.qxw
- (6.96 KiB) Downloaded 52 times
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
lairom
- Posts: 5
- Joined: Tue Nov 16, 2021 7:54 am
- Real Name:
Hello,
Many thanks for your previous advices guys.
So I made a Fixture for my ledbars (32 RGB pixels).
Now here's a new problem :
the QLC+ Fixture Editor loads the Heads horizontally.
I want them vertically, because the bars are physically standing up.
This is annoying because I have 32 heads per bar and 20 bars to set (you see 5 bars in the photo)
Is there a way to tell QLC+ to load the fixture vertically directly or should I move 20*32 heads manually one by one ?
Many thanks for your previous advices guys.
So I made a Fixture for my ledbars (32 RGB pixels).
Now here's a new problem :
the QLC+ Fixture Editor loads the Heads horizontally.
I want them vertically, because the bars are physically standing up.
This is annoying because I have 32 heads per bar and 20 bars to set (you see 5 bars in the photo)
Is there a way to tell QLC+ to load the fixture vertically directly or should I move 20*32 heads manually one by one ?
- Attachments
-