Sorry if this is a stupid question but I'm a novice user.
At our village Hall we have(had) a PC driving some DMX fixtures via Martin Lightjockey and a Martin USB-DMX interface. We have not used the software much as it seemed complex to set up and was tied to the PC, which meant sitting in the hall. However the PC seems to a died.
A while ago I was looking for alternative software and found QLC+, which attracted me as I'm a Mac user with a Raspberry Pi too.
So much for the background.
My question is 'Can I control the lights via the Martin USB-DMX device from QLC+?' If the answer is yes, at least I'll be happy to experiment rather than stumbling in the dark.
Martin USB-DMX
-
mcallegari
- Posts: 4711
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Short answer: no.
Those kind of devices use proprietary protocols bound to a specific controller. In your case Lightjockey.
I suggest you purchase a device listed in this page: https://www.qlcplus.org/features.html
Those kind of devices use proprietary protocols bound to a specific controller. In your case Lightjockey.
I suggest you purchase a device listed in this page: https://www.qlcplus.org/features.html