Page 1 of 1
Start qlc
Posted: Wed Nov 04, 2020 11:17 am
by PasztiVilmos
I would ask for the help of someone who could explain in detail how to make qlc work.
I’m not going anywhere with the video tutorials because the first steps are missing from each.
utalomaguglit4@gmail.com
Re: Start qlc
Posted: Thu Nov 05, 2020 8:46 am
by GGGss
Install the program - this is straight forward...
connect a DMX interface -> tutorial 1
create fixtures -> tutorial 2
and so on.
Or you have trouble with what extra steps?
Re: Start qlc
Posted: Mon Nov 09, 2020 7:24 am
by PasztiVilmos
Thanks for the human response Friday!
The first question is what interface to connect? Unfortunately I have marq scenuq 1 and I guess it is not detected by any program but marq.
Sincerely, Robinson Cruso
Re: Start qlc
Posted: Mon Nov 09, 2020 8:11 am
by GGGss
Well, Robison,
It helps if you phrase your questions so that robots can read and understand them...
List of supported devices:
https://www.qlcplus.org/features.html and there is no reference to a Marq model.
I wonder why QLC+ does not detect it... Could it be because it is unsupported?
This would actually be good first steps in all the tutorials - get to know your product / know what you are doing.
THX for the hint.
Friday