Robe Led Wash 300
-
tricot
- Posts: 118
- Joined: Sun Aug 06, 2017 5:17 pm
- Location: Lisboa, Portugal
- Real Name: santiago
Hi friends , here my contribution :
- Attachments
-
ROBE Led Wash 300.qxf- (3.45 KiB) Downloaded 79 times
-
edogawa
- Posts: 630
- Joined: Thu May 07, 2015 10:34 am
- Real Name: Edgar Aichinger
As I suggested in the other thread https://www.qlcplus.org/forum/viewtopic ... 29&t=14565 you should run your definition through https://www.qlcplus.org/fixture_validator.php. There are three problems it sees and I think Massimo will accept your file only when it passes the validator, as written in fixture sharing guidelines. And maybe add the other modes the device offers, otherwise the definition is of pretty limited use to other users.
Also I see that you put the lux/5m spec from Robe's data as color temparature which is plain wrong. IMO rather put a fake 3200 or 4500 Kelvin value or no value at all there, as it's a LED fixture, there is no real basic color temperature to announce...
For the record, a few years ago I contributed a fixture file for the bigger Robe Robin 800 LED Wash, I haven't compared them but possibly they are similar enough to copy stuff from there...
Also I see that you put the lux/5m spec from Robe's data as color temparature which is plain wrong. IMO rather put a fake 3200 or 4500 Kelvin value or no value at all there, as it's a LED fixture, there is no real basic color temperature to announce...
For the record, a few years ago I contributed a fixture file for the bigger Robe Robin 800 LED Wash, I haven't compared them but possibly they are similar enough to copy stuff from there...