Q Light Controller+

Sorry for all these questions but I never used QLC+ for live events before, always used it for shows.

I have made a color picker with scenes and made buttons for each color. I have led pars, led blinders, led moving head and a color wheel moving heads. I made a special button not in the solo frame for the all moving heads to white. But the problem I am having is if you choose another color my color wheel moving head changes so is there a command to say this scene is number 1 and all other is number 2 or more?

Yeah the colorwheel heads are hard to tackle because mostly the 'white' color is a 0-value (or low value) for 'open'.
So you can't use HTP, meaning there is no other way of controlling priority, so you will have to be creative.

My solution is a construction with a loopback channel, functioning as a reset inside a solo frame.
Choosing white outside of the frame fires a collection. Inside this collection, the white color wheel and the reset cue's are selected.
Through loopback, the color chosen in the solo frame is reset (even if there is white selected).
Works but the loopback channel won't get reset...