Fractal (or other) 24x3 BAR
Posted: Wed Sep 02, 2020 11:58 am
Hi, this is my first full fixture. Fractal is not a popular manufacturer, but I know they use "Chinese" lights and put their logo on that, so it might work for other lights too. I tried my best to put all seven modes together in one fixture and I think that it matches the light very well.
The only thing I wasn't able to do (or didn't know how to do it), was that for example in 3-channel mode, only one LED would appear on 2D view in QLC. I know that I should add heads to modes, but can't add more than one head to one rgb section, so although the bar has 24 LEDs, there are as follows:
- 1 LED in 2, 3, 4, 7 channel mode
- 2 LEDs in 6 channel mode
- 4 LEDs in 12 channel mode
- 8 LEDs in 24 channel mode
If there is a way to make more than one LED react to one RGB section on fixture (3 chennels) let me know and I'll correct that.
I'm attaching PDF manual which I found on the Internet after hours of searching.
The only thing I wasn't able to do (or didn't know how to do it), was that for example in 3-channel mode, only one LED would appear on 2D view in QLC. I know that I should add heads to modes, but can't add more than one head to one rgb section, so although the bar has 24 LEDs, there are as follows:
- 1 LED in 2, 3, 4, 7 channel mode
- 2 LEDs in 6 channel mode
- 4 LEDs in 12 channel mode
- 8 LEDs in 24 channel mode
If there is a way to make more than one LED react to one RGB section on fixture (3 chennels) let me know and I'll correct that.
I'm attaching PDF manual which I found on the Internet after hours of searching.