Physical attributes for fixtures
Posted: Sun May 03, 2020 9:46 am
Hello,
Are there plans to add "Physical attributes" to DMX channels?
In particular i was thinking about adding the minimal and maximal Strobe frequency to a strobe channel and a minimal and maximal Zoom value to a zoom channel, maybe also color temperature to color channels ect...
Specially the Strobe frequency then could be used inside of QLC+ instead of the DMX value for strobe canals, and maybe also be controlled by a speed dial.
I think having the "real physical values" for each fixture would also improve the 3D Viewer.
Examples in Commercial products:
MA: https://youtu.be/7xbON0uqd6c?t=412
ChamSys: https://youtu.be/Iy0QRN00Ze4?t=270
Maybe it also would be a nice idea to add input fields for stuff like "Fixture Highlighting" ect., to the Fixture editor, even if it is not used by QLC+ yet. It would safe a lot of time reviewing old fixtures profiles in the future.
Are there plans to add "Physical attributes" to DMX channels?
In particular i was thinking about adding the minimal and maximal Strobe frequency to a strobe channel and a minimal and maximal Zoom value to a zoom channel, maybe also color temperature to color channels ect...
Specially the Strobe frequency then could be used inside of QLC+ instead of the DMX value for strobe canals, and maybe also be controlled by a speed dial.
I think having the "real physical values" for each fixture would also improve the 3D Viewer.
Examples in Commercial products:
MA: https://youtu.be/7xbON0uqd6c?t=412
ChamSys: https://youtu.be/Iy0QRN00Ze4?t=270
Maybe it also would be a nice idea to add input fields for stuff like "Fixture Highlighting" ect., to the Fixture editor, even if it is not used by QLC+ yet. It would safe a lot of time reviewing old fixtures profiles in the future.