Q Light Controller+

Hello guys,
We are dmx adapter manufacturer
How we can add our harware in output list? and add us to list of adapters manufacturers?
What are the conditions for manufacturers?

Hi, first off, a product web page would be nice...

Some information/specs of the adapter would be nice too.

Have you checked that it works on all platforms? Windows, macOS and Linux

Manufacturers that are listed in the website homepage have contributed to QLC+ in the past, by sending one or more adapters to me.
However, these COVID days makes it impossible to ship anything, so that has to be delayed.

mcallegari, Can we discuss this in private messages?
Unfortunately, I can not write you a personal letter on the forum

We have several products compatible with EnttecPro or ultraDMX, but ours have an extended list of API commands specific to our products. For example, using the built-in wireless DMX module, up to 8 universes in one USB device, various specific settings, etc. We also have other devices with a different exchange protocol, and some are still in development.

We can develop a plug-in for integrating our devices into QLC on our own, but we would like to know if our plug-in can be distributed as part of QLC.
Ideally, we would like our users to be able to select our device in the list of hardware by the name of the manufacturer, then select specific exchange settings.

Depending on the product, we support the operation of the device on Windows or Mac.
Is support for all platforms mandatory?

mcallegari wrote: ↑Fri Apr 17, 2020 7:19 am Hi, first off, a product web page would be nice...

Some information/specs of the adapter would be nice too.

Have you checked that it works on all platforms? Windows, macOS and Linux

Manufacturers that are listed in the website homepage have contributed to QLC+ in the past, by sending one or more adapters to me.
However, these COVID days makes it impossible to ship anything, so that has to be delayed.

Hello! My name is Sergey, I represent Yarilo pro company.
We produce USB DMX controllers and Art-Net gates. Many of our customers use QLC+, we want to get into the list of supported controllers. Our controllers have been tested on Windows, MacOS and Linux.

FTDI based:
Yarilo Open DMX https://yarilo.pro/en/controllers/usb-d ... o-open-dmx
YARILO DMX PRO https://yarilo.pro/en/controllers/usb-d ... lo-dmx-pro

Art-Net:
Yarilo LANdmx2 https://yarilo.pro/en/controllers/art-n ... lo-landmx2
Yarilo LANdmx4 https://yarilo.pro/en/controllers/art-n ... lo-landmx4

If you need test samples of our products, we are ready to send them to you.


P.s. We also created a community of Russian-speaking QLC+ users on vk.com to promote and study the program. https://vk.com/qlcplus

Hi, I've sent an email to Sergey on April 18th.
Can you please check?