Q Light Controller+

Hello friends, how can I call some channels in SIMPLE DESK mode?
for example: ch 23 to ch 58 to 25%
Without having to change the page and uploading the channels manually.

Thanks and regards.

You can try DMX Keypad from the webinterface.
https://www.qlcplus.org/docs/html_en_EN ... rface.html

Thanks! but how can modify the shortchut of the .exe?
I need put this ? : :\QLC+\qlcplus.exe-w?

i can't edit the command line parameters.
It's only put a w ?

Create a shortcut for QLC+ in your desktop, edit properties and add " -w" at the end in the Target field.

Perfect , thanks.

And the number of ip for entry what is ?

for example:
192.168......:9999?

You need to connect the computer running QLC+ and a phone or tablet to the same network. On your phone open your_computer_ip:9999. Then Simple Desk -> DMX Keypad.
Or open http://your_computer_ip:9999/keypad.html

ok , sorry my friend, so the steps are:

1 create a shortcut of .exe , modify the target with -w
2 open QLC+ , go to inputs/outputs select the network
3 in a browser web put the same number with :9999/keypad.html in the end (this step doesn't work)

I'm missing something?

Can you post the contents of the target field?.
You also can start QLC+ from command line. Open a cmd window and execute C:\QLC+\qlcplus.exe -w. Then in your browser you can access the web interface using:
http://localhost:9999 for accessing from the computer that runs QLC+
http://127.0.0.1:9999 for accessing from the computer that runs QLC+
http://xxx.xxx.xxx.xxx:9999 (where xxx.xxx.xxx.xxx is your IP) You can access to this address from the computer that runs QLC+ or from other computer, phone or tablet connected to the same network.

Yes i can put all the info ok, can modify the target and all, but the server in the browser gives me and error.
Also select in QLC+ the function inputs/outputs the device, with the respective output : 192.168.1.8 and in the browser 192.168.1.8:9999

and doesnt works, maybe it's mozilla? the proxy ? or what ?

Thanks

tricot wrote: ↑Thu Apr 16, 2020 12:22 pm Yes i can put all the info ok, can modify the target and all, but the server in the browser gives me and error.
Also select in QLC+ the function inputs/outputs the device, with the respective output : 192.168.1.8 and in the browser 192.168.1.8:9999

and doesnt works, maybe it's mozilla? the proxy ? or what ?

Thanks

You are wrong. The web interface runs together with QLC+. So if your firewall is accepting connections to port 9999 (tcp) you are fine.
The inputs / outputs tabs don't do anything in respect to the QLC+ web interface.

When on PC do [windows-button]+[R], type in [C][M][D] and in the dos box type in [ipconfig]+[enter]
Now you can see your IP-address where QLC+ runs at.
Now you address your other computer device to that address:9999

(I'm assuming that you have 2 devices in the same network. If only one device doing both - then it's local-loopup 127.0.0.1)

Your computer is connected to your home network?. I not you can only connect to localhost o 127.0.0.1. For connect to qlc+ from other device in the network you had to use 192.168.1.8.
Check that you are connected to your network and check what is your ip as @GGGss explains in his message.

thanks!!! finally it's work !
thanks a lot friends.