MIDI output on multiple channels for the same device
Posted: Sat Mar 07, 2020 12:27 am
hey,
i'm using QLC+ 4.12.2 and try to incorporate the Novation Launch Control XL USB MIDI controller into my setup.
this worked well for the input so far. it has 16 virtual banks that are mapped to the physical controls that generate MIDI events on channels.
however - the controller has LEDs that can be controlled via MIDI output on the respective channels.
the problem is, that i can either assign a specific channel and control LEDs for that bank (only), or use '1-16', which also only controls the first channel/bank. (the latter does what it should for the input)
how do i accomplish to address the LEDs of all banks, since i cannot create multiple individual output channels for each bank, as it's the same device.
i'm using QLC+ 4.12.2 and try to incorporate the Novation Launch Control XL USB MIDI controller into my setup.
this worked well for the input so far. it has 16 virtual banks that are mapped to the physical controls that generate MIDI events on channels.
however - the controller has LEDs that can be controlled via MIDI output on the respective channels.
the problem is, that i can either assign a specific channel and control LEDs for that bank (only), or use '1-16', which also only controls the first channel/bank. (the latter does what it should for the input)
how do i accomplish to address the LEDs of all banks, since i cannot create multiple individual output channels for each bank, as it's the same device.