Page 1 of 1
Ayra Alo Micro Scan Led Scanner [Updated]
Posted: Mon Mar 02, 2020 7:59 pm
by jochem4207
Hello QLC+ Forum Members,
I've created a fixture for the Alo Micro Scan Led Scanner. It's not finished yet, i've some questions left to make it perfect.
Known missing details
- Pan / tilt max degrees
- Lumens
- Colour Temp
- Lens
It's created for the 10W Ayra ALO Micro led scanner
The pdf is to large so the link to bax shop is
https://www.bax-shop.nl/index3.php?opti ... d_id=39521
Re: Ayra Alo Micro Scan Led Scanner [Updated]
Posted: Sat Sep 24, 2022 7:58 pm
by cnf
Hi,
I pretty much made the same thing, as I didn't search the forums first
I am missing the same information, as it isn't documented anywhere...
Re: Ayra Alo Micro Scan Led Scanner [Updated]
Posted: Sun Sep 25, 2022 6:13 am
by janosvitok
If you can access the light physically, the degrees are quite easy to guess. Just set pan to 0, remember the angle (look from the top), set dmx to 255 and find out how many degrees did it travel.
Similarly for tilt (look from one side).
Jano
Re: Ayra Alo Micro Scan Led Scanner [Updated]
Posted: Sun Sep 25, 2022 4:53 pm
by cnf
i should have access to them somewhere next week, and I will do just that.
the lumens and color temp, i'm not sure how to find out, though...
Re: Ayra Alo Micro Scan Led Scanner [Updated]
Posted: Mon Sep 26, 2022 7:40 am
by GGGss
10W CREE Led -> assume color temp to be 7000k
Lummens: around 1200 Lm
Re: Ayra Alo Micro Scan Led Scanner [Updated]
Posted: Mon Sep 26, 2022 11:06 am
by cnf
Noted!
I should have 2 of them by end of week, so I can check the rest then!
Re: Ayra Alo Micro Scan Led Scanner [Updated]
Posted: Thu Sep 29, 2022 11:06 am
by cnf
I have added all the info to my profile, and attached it here.
Is this good, or should I make a new post? (this isn't the same file as OP's, but for the same fixture)
Re: Ayra Alo Micro Scan Led Scanner [Updated]
Posted: Sun Nov 20, 2022 12:44 pm
by mcallegari
Added, thanks