OSC raspberry PI not working

Ask a question about the usage of QLC+ with the Linux operating system
Forum rules
Post Reply
Calysto
Posts: 1
Joined: Tue Jan 21, 2020 10:16 am
Real Name: Martijn de Vries

Hello, I;ve made af few nice projects for this weekend. I've put them on a PI4, made an Acces Point of the wifi module, and use the ethernet connection to output ARTNET to a node. All working!

Now I want to use TouchOSC to control the show. When I connect to a windows PC with the same show, it's working fine. On windows I use port 8000 and 9000.

Do I have to set ports on linux too? How? And what about the OSC feedback adres?

Are the ports that I use in the show on windows, used on my Raspberry PI?

In the configuration panel I use Universe 4 for input from TouchOSC, adress 192.168.4.1, my tablet get's an adress in that range from the DHCP server.
My LAN-network is on 10.0.0.139

I really have to get this working this weekend... please help me! :)
Attachments
Halfpipe.qxw
(62.82 KiB) Downloaded 113 times
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

You know that all participant have to be on the same subnet?
192.168.4.1 can talk to 10.0.0.139 if there is a configured router in place. And you will have to discover your tablet's IP address also...
(and what IP address does your windows computer have?)

I'm pointing out that it's not a QLC+ 'problem' but a basic network 1o1...
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Post Reply

Return to “Linux specific”