Chaser within chaser and audio trigger
Posted: Tue Nov 12, 2019 9:04 am
Hi all!!
Ive been trying to search the forums for an answer. Maybe I havent gotten it right.
I have an UV LED bar with segments. I can create running effects by either using chasers or using sequence, no problem. I can control the speed of this effect by using an audiotrigger directly to VC Widget or via loopback. This works.
What I want to do:
1. I have created multiple running effects (in chasers or sequence, ive tried both). I want the audio to still control the speed of the effect, but also switch between the different effects. For example every 8th beat it switches to a random new running effect.
2. I could use several audiotriggers for this, but this is not a good solution. I would like to use only one via loopback but problem then is that the divisor-function doesnt work.
3. Think of it like having a "Master" chaser, which has all the different effects (chasers or sequence) inside it and this should control which one is "active". Problem is when audio is triggering the individual que-list of the effects they all are played at the same time.
What Ive tried:
1. Both chasers and sequence
2. Tried loopback to a Clock widget instead, which then controls the "Master chaser"-cuelist with divisor 8 (in the clock widget). And the loopback directly controls each cue-list of effect. = they are still played at the same time.
Any ideas on this?
Basically I want an easy audiotriggered show when DJing, but I would like some randomisation in the effects!
Regards
Arvid
Ive been trying to search the forums for an answer. Maybe I havent gotten it right.
I have an UV LED bar with segments. I can create running effects by either using chasers or using sequence, no problem. I can control the speed of this effect by using an audiotrigger directly to VC Widget or via loopback. This works.
What I want to do:
1. I have created multiple running effects (in chasers or sequence, ive tried both). I want the audio to still control the speed of the effect, but also switch between the different effects. For example every 8th beat it switches to a random new running effect.
2. I could use several audiotriggers for this, but this is not a good solution. I would like to use only one via loopback but problem then is that the divisor-function doesnt work.
3. Think of it like having a "Master" chaser, which has all the different effects (chasers or sequence) inside it and this should control which one is "active". Problem is when audio is triggering the individual que-list of the effects they all are played at the same time.
What Ive tried:
1. Both chasers and sequence
2. Tried loopback to a Clock widget instead, which then controls the "Master chaser"-cuelist with divisor 8 (in the clock widget). And the loopback directly controls each cue-list of effect. = they are still played at the same time.
Any ideas on this?
Basically I want an easy audiotriggered show when DJing, but I would like some randomisation in the effects!
Regards
Arvid