Page 1 of 1
Eurolite Pro Control Adapter
Posted: Wed Oct 23, 2019 2:40 pm
by firedragon
Does the "Eurolite pro Control dmx Software 1024" USB Adapter work with the qlc+ Software? I don't get an.output signal to the adapter.
Thank you.
Re: Eurolite Pro Control Adapter
Posted: Thu Oct 24, 2019 8:14 am
by GGGss
Please use the search function of this forum.
Re: Eurolite Pro Control Adapter
Posted: Thu Oct 24, 2019 2:57 pm
by firedragon
I did, but found nothing.
Re: Eurolite Pro Control Adapter
Posted: Thu Oct 24, 2019 3:46 pm
by mcallegari
Please show the input/output tab
You might need to force it to "pro tx/rx"
Re: Eurolite Pro Control Adapter
Posted: Sat Oct 26, 2019 6:45 am
by firedragon
I set the output to pro tx/rx. Unfortunately no signal arrives on the adapter and the USB LED lights up permanently and should blink when receiving a signal.
This information displayed in qlc:
DMX USB
Dieses Plugin bietet DMX-Ausgabesupport für DMXKing ultraDMX range, Enttec DMX USB Pro, Enttec Open DMX USB, FTDI USB COM485 Plus1, Vince USB-DMX512 Keine Geräte verfügbar.
1: CQ DMX512 Stand Alone Device - DMX Ausgang 1
Gerät ist funktionsfähig.
Verwendeter Treiber: FTD2xx
Protokoll: ENTTEC
Hersteller: CHROMATEQ
Seriennummer: CHROMATEQ