Image will not autostart / checksum fail

[buldar]

I've flashed the image provided at least 10 different times and each time my pi will boot into command line but not auto start. i read in another post this may be due to a corrupt image file. so i downloaded the .md5 file to check and got this error on several different downloads on 2 different computers.

Checksum comparison report generated by ExactFile version 1.0.0.15
10/1/2019 9:03:27 AM

Digest file: C:\Users\ajgillette\Downloads\qlcplus_raspbian_buster_20190825.7z.md5
Base folder: C:\Users\ajgillette\Downloads\

1 files in digest file. 1 errors.

FAIL SHA1 qlcplus_raspbian_buster_20190825.7z

Please, help..

[mcallegari]

Checksum is MD5, not SHA1.
Also, have you plugged something on the HDMI port?

[Dingezz]

found out that the latest buster release doesn't start the QLC webinterface without a monitor attached, checked it on the pi 2, 3 and 4 the previous stretch version works fine without monitor. (RPI 4 not supported)

[mcallegari]

I suspected that.
Then see this: viewtopic.php?f=7&t=13738 (solution on page 2)