Q Light Controller+

Hi all!

Thanks for your great software! I need to use two universes and I am in the need to buy a new interface. I am thinking in the DMX USB PRO Mk2. Is there any official support for that particular interface (MacOs Mojave) and do you recommend any other interfaces for sending two universes?

Thanks a lot!

I use several DMX USB PRO Mk2's - they are my work horses.
Only downside is the USB connector inside - now they all have a small USB extension cord firmly attached to the body - so no more breaking off during harsh treatment.
And if you use a USB splitter make sure it is a powered one and it has ENOUGH juice to spare... (A 600mA won't do it...)

I have the Pro Mk2 and I am figuring out the set up still. Looks like it works fine when connected via usb from mac with i/o settings both in and out. I am trying out an active usb hub to boost signal in order to lengthen the usb cable first. Then I am going for cat5 connectivity via Raspberry Pi and attempting to use a wireless set up.