TouchOSC and MIDI
Posted: Fri Sep 06, 2019 11:37 am
Hey dudes and dudettes,
After consulting all the threads I saw on the old "midi input" issue I am at my wits end. Not that I was too witty to begin with...
Setup: Laptop, Win10 64 Bit, QLC+ 4.12.2., uDMX dongle, Samplitude 16 DAW
here's the qxw with my apparently faulty settings https://www.dropbox.com/s/2e0fuputv8eec ... t.qxw?dl=0
After having installed TouchOSC to remote QLC with (working fine) I wanted to switch to controlling QLC from my DAW, since I find it easier to handle my audio backing tracks that way and our new drummer is ok with cueing tracks from a laptop (unlike the old one who refused anything electric and even moaned about a tiny headphone preamp which made his in-ear signal better, seriously what's wrong with people? I digress...apologies...)
So, when I want to set up a MIDI input in Universe 1 the only option I get is Touch OSC. Should be okay, right?
I have set the midi output in my DAW to TouchOSC and the midi channel to 3, as suggested in the QLC settings
On the I/O page of QLC no joystick appears though, MIDI seems not to be getting through.
Am I doing anything fundamentally wrong here?
Also I did check for my firewall but anything that looks like qlc+, touchosc or samplitude has been okd, so it shouldn't be that.
once again, cheers to all of you for your time and thought!
After consulting all the threads I saw on the old "midi input" issue I am at my wits end. Not that I was too witty to begin with...
Setup: Laptop, Win10 64 Bit, QLC+ 4.12.2., uDMX dongle, Samplitude 16 DAW
here's the qxw with my apparently faulty settings https://www.dropbox.com/s/2e0fuputv8eec ... t.qxw?dl=0
After having installed TouchOSC to remote QLC with (working fine) I wanted to switch to controlling QLC from my DAW, since I find it easier to handle my audio backing tracks that way and our new drummer is ok with cueing tracks from a laptop (unlike the old one who refused anything electric and even moaned about a tiny headphone preamp which made his in-ear signal better, seriously what's wrong with people? I digress...apologies...)
So, when I want to set up a MIDI input in Universe 1 the only option I get is Touch OSC. Should be okay, right?
I have set the midi output in my DAW to TouchOSC and the midi channel to 3, as suggested in the QLC settings
Am I doing anything fundamentally wrong here?
Also I did check for my firewall but anything that looks like qlc+, touchosc or samplitude has been okd, so it shouldn't be that.
once again, cheers to all of you for your time and thought!