Martin Thrill Mini Profile
-
vweimer
- Posts: 4
- Joined: Thu Sep 27, 2018 6:33 pm
- Real Name: Vincent Weimer
We just purchased 2 Martin Thrill Mini Profile lights. They work great with QLC+, but when they are receiving a DMX signal the ability to allow the lights to use their programmed sound activated show. Is there a way to activate this using QLC+ or is there an easy way to stop sending a DMX signal to the lights without quitting all the way out of QLC+. Thanks for any input or help. We are fairly new with using QLC+, so I am open to any and all suggestions or help that anyone can provide.
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
I had a quick look at the manual and it says: stand-alone mode or DMX.
What you want is not doable with QLC+ (unless pulling the DMX cable running to them)
What you want is not doable with QLC+ (unless pulling the DMX cable running to them)
All electric machines work on smoke... when the smoke escapes... they don't work anymore