Page 1 of 1
DMXkingPro2 Univ 2 work with QLC+4??
Posted: Wed Aug 28, 2019 7:06 pm
by jjhp3
Didn't have room for the whole question... which is Universe 1 works great, but today I tried to use the universe 2 USB output from the DMXking box and nothing appears in the Input/Output for universe 2 in QLC+ 4.12.1. Mac OS High Sierra 10.13.6
Thanks!
John
Re: DMXkingPro2 Univ 2 work with QLC+4??
Posted: Fri Aug 30, 2019 6:41 am
by GGGss
Looking at the specs of your adapter I guess you have to configure port 2 to be an output...
I suppose they provide a tool of some kind to change that?
Re: DMXkingPro2 Univ 2 work with QLC+4??
Posted: Sun Sep 01, 2019 3:19 am
by JP3
Thanks for your reply. I received a message from DMXKing today saying they had sent a unit to QLC+ a while ago and thought it should work in enhanced mode. What is enhanced mode? I asked the same question of DMXKing... hoping to solve this, John
Re: DMXkingPro2 Univ 2 work with QLC+4??
Posted: Mon Sep 02, 2019 7:41 am
by GGGss
Can you confirm that the 2nd port is configured as output please?
Re: DMXkingPro2 Univ 2 work with QLC+4??
Posted: Mon Sep 02, 2019 7:46 am
by mcallegari
I have the old UltraDMX2 PRO model. I haven't got the new one with ArtNet included (but I'd really like to try one)
@JP3 can you please share a screenshot of the Input/Output devices list when the adapter is plugged in?
I need to check with which name it presents itself.
Re: DMXkingPro2 Univ 2 work with QLC+4??
Posted: Wed Sep 04, 2019 1:25 pm
by JP3
Thank you for looking into this. Your program works very well running behind Isadora for the sound and video. I will send a screen shot today.
John
Re: DMXkingPro2 Univ 2 work with QLC+4??
Posted: Wed Sep 04, 2019 8:00 pm
by JP3
Here's my screen shot - if I add another DMX cable and light to the other output, no DMXPro options are available. Thanks - John
Re: DMXkingPro2 Univ 2 work with QLC+4??
Posted: Thu Sep 05, 2019 9:01 am
by mcallegari
That's what I suspected. The product name is not recognized as DMXKing, therefore it is mapped as a generic device.
You need to force the transmission protocol to "Ultra Pro" (double click on the device name to open the configuration dialog)
I really need to get one of those adapters and patch the detection code.
Re: DMXkingPro2 Univ 2 with QLC+4?? solved!
Posted: Fri Sep 06, 2019 7:54 pm
by jjhp3
Bravo! Grazie mille! That method produced two universes that work. But now there is another problem I can't figure out: I am using Isadora to send MIDI messages to QLC+ to trigger scenes. I can't understand how to have Isadora as an input to both universes. I must be missing something...
Thanks for any advice,
John