ArtNet multiple universes update order
Posted: Sat Jun 15, 2019 11:37 am
Hello,
I try to controll 1.360 RGB LED pixels using a LED Pixel controller [1]. The controller supports 8 universes which 170 LED each. It works perfectly with e.g. Jinx [2] but I like to control the animations using QLC+ and Matrix Animations. Problem is, I have to reduce the mastertimer frequency to 10 otherwise I get glitches and other display failures.
The controller expects the artnet data with a refresh rate of 33hz (for a update of all universes). That means Universe 1 than Universe 2 than Universe 3 etc...
My questions would be:
Regards
Thomas
[1] https://www.ulrichradig.de/home/index.p ... el-con-neu
[2] http://www.live-leds.de/
I try to controll 1.360 RGB LED pixels using a LED Pixel controller [1]. The controller supports 8 universes which 170 LED each. It works perfectly with e.g. Jinx [2] but I like to control the animations using QLC+ and Matrix Animations. Problem is, I have to reduce the mastertimer frequency to 10 otherwise I get glitches and other display failures.
The controller expects the artnet data with a refresh rate of 33hz (for a update of all universes). That means Universe 1 than Universe 2 than Universe 3 etc...
My questions would be:
- Does anyone else using this Pixel Controller in combination with QLC+?
- How is QLC+ updating the different universes? Is each universe updated in a different thread with the frequency of the master timer or is each universe updated after each other?
Regards
Thomas
[1] https://www.ulrichradig.de/home/index.p ... el-con-neu
[2] http://www.live-leds.de/