Long fade out ‘stuck’ at undefined colour.
Posted: Mon Jun 10, 2019 9:06 am
Sorry for the perhaps bad explanation but I have an ‘issue’ with a long fade out and I was wondering if my config is perhaps invalid or the fixture can’t handle the request.
So in a sequence at step 1, Led 1, 3 and 5 of an Ayra Led bar are blue for 5 seconds with a 5 seconds fade out and a total time of also 5 seconds. In my mind the Led's go on and fade out during 5 seconds. At that time Led 2 and 4 are lit and also fade out for 5 seconds. But what happens is that the Led's fade out a little and then stay at a sort of yellow/orange colour.
When I look at the terminal it looks ok. Could this mean the fixture can’t handle the long fade out or could the ‘cheap’ DMX USB interface be the problem. I use QLC+ 4.12.1 on MAc OS High Sierra with an Enttec Open DMX USB Interface.
So in a sequence at step 1, Led 1, 3 and 5 of an Ayra Led bar are blue for 5 seconds with a 5 seconds fade out and a total time of also 5 seconds. In my mind the Led's go on and fade out during 5 seconds. At that time Led 2 and 4 are lit and also fade out for 5 seconds. But what happens is that the Led's fade out a little and then stay at a sort of yellow/orange colour.
When I look at the terminal it looks ok. Could this mean the fixture can’t handle the long fade out or could the ‘cheap’ DMX USB interface be the problem. I use QLC+ 4.12.1 on MAc OS High Sierra with an Enttec Open DMX USB Interface.