Q Light Controller+

I got a testcase with this equipment

Raspberry pi3
Sdi7” touchscreen
Enttec pro

Powered by 3A power adapter


sometimes when a show is running the raspberry fails/crash and has to be Restarted. it's not at a specific show. I also sometimes have the problem on a MacBook. but I don't know if this is the same problem, but I have a log of this.

I replaced the power supply in the hope that the problem would be solved. but unfortunately this did not help. yesterday I had the problem again.

can the problem be in the sd card? I am using a Class 3 SD card and will try a Class 10 soon.

Please try the latest test version on macOS first.
I've made some changes in the attempt to avoid crashes.
It needs to be tested for hours/days though, so I need some help with that.

If it turns out to be solid, then the next Raspberry Pi version will be solid too.

I will test this version

I got the first crash for now. Run the app on a mac for.

Hi, thanks for testing and for the trace.
Indeed there was a mistake in the code.
I've just uploaded a new test version for macOS.
Can you please try again?

Otherwise, can you instruct me how to reproduce with a sample project? Thanks.

I'm going to try this version. I used the above project and actively used it for a few hours, then there was nothing wrong. then I let him walk on a chase for a long time and I got the crash

I cant use the project above cause it uses custom fixtures and I can't seem to find the chase you're talking about in the VC.