[Solved] Loopback behaves strange

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
teiko
Posts: 7
Joined: Mon Apr 01, 2019 6:24 pm
Real Name:

Hi,
I built a simple project to test the loopback.
When I set the submaster to any value but 0 and then push the button the submaster is set to 1.
But the szene behind the button is set to 183.

I also tried other examples using the loopback and they behave alike.

What am I doing wrong?

Thanks.
Attachments
loopback.qxw
(7.81 KiB) Downloaded 64 times
Last edited by teiko on Thu Apr 04, 2019 5:40 pm, edited 1 time in total.
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Loopback channels have to have their own universe.
Universe 1 as loopback and Artnet <-- nono !!
(and with the latest version of QLC+ there is a small problem with loopback functionally: loopback not going to 0 zero value.)
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
teiko
Posts: 7
Joined: Mon Apr 01, 2019 6:24 pm
Real Name:

The probelm was that I put the button inside the frame with the submaster.
This way it was a closed loop which moves down the fader to almost 0.
Top
Post Reply

Return to “Generic”