Page 1 of 1
DMX Input with Elation eNode8
Posted: Sun Feb 03, 2019 4:51 pm
by diesessash
Hey guys, on my Elation eNode8 I use the first 2 universes for DMX-OUTPUT and I want to use the 3rd universe as an DMX-INPUT. The problem is, when I have a DMX Input, the OUTPUT interrupts every 2-5minutes (all lights turning off and on). What could the problem be and how can I fix that?
Warm regards Sascha
Re: DMX Input with Elation eNode8
Posted: Mon Feb 04, 2019 10:45 am
by GGGss
You have so many aspects what could go wrong ...
Is your network stable and setup correctly?
If you try to narrow the problem using only input of the elation? What happens?
etc etc
Re: DMX Input with Elation eNode8
Posted: Wed Feb 06, 2019 8:17 pm
by diesessash
I think my network is stable (eNode directly connected with the computer). How should the settings be? i just changed the "DMX-Port-Mode" on the eNode to INPUT, nothing else. The input works, there is just the problem with the interrupting OUTPUT.
Would be great if someone knows a solution.